It is use with 1mm²-16mm² twin and earth cable。
|
hem No.
|
Height
|
W(mm)
|
Nail Size（mm）
|
Packing
|
| |
H(mm)
|
H,(mm)
|
|
|
|
|
YJS-1.5m,n'
|
6.2
|
4.5
|
8.0
|
2 ×20
|
100pcs/ pack
|
|
YJS-2.5m,n'
|
7.2
|
5.6
|
10.0
|
2 ×20
|
|
|
YJS-4.0,mn'
|
9.5
|
6.5
|
11.5
|
2 ×24
|
|
|
YJS-6.0mm'
|
10.5
|
7.2
|
13.0
|
2×27
|
|
|
YJS-10.0.nm1
|
10.7
|
8.3
|
17.0
|
2.2 × 27
|
|
|
YJS-16nm2
|
13.5
|
10
|
20.0
|
2.4×34
|
|
Brief Introduction:
Featuires of our products:
1. Long operating life
2. Easy to operate
3. Beautifully designed.Different size and specificatin can be chosen.
4. Usage: Put the cable under the clip and hammer the nail into the wall to secure the cable.
5. Application: Securing of cables for general indoor wiring.
6. All the products we supply are under strict control. And we offer good after-sale service.
7. Special designs are welcomed and requirements are satisfied.
8.We offter various types of high quality building materials such as nails, galvanized wires, welding consumables and wire meshes.
Company Profile:
Yongjiu Electric Power Fitting Co.,Ltd. is a primary domestic professional manufacturer of electric power fitting and cable accessory.Our main products are cable connector,line fitting, (Copper Aluminium and iron),cable accessory,plastic products, powertools, fuse(Lv&HV),light arresterand insulator with approved quality complying with ISO9001/2000.
Our company was founded in 1989. Covering an area of 20,000 square meters,our company has more than 300 skilled staffs,including 38 senior & intermediate technical personnel and administrative personnel.
Focusing attention on innovation,our company has successfully developed more than 200 series products. With internationally advanced machinery processing facilities,our company is capable of producing variouselectric power fitting and cable accessory to meet customers' special requirement.Our products have been exported to more than 40 countries and sold well.
How does our company do the quality test:
The final factory test of power fittings shall normally include the following aspects: Appearance inspection; Dimension inspection; Material testing; Functional testing; Performance testing and Pressure testing.
1. Appearance inspection is to check whether there are any dents and scratches on the external surface of electric power fittings, whether there are defects in assembly, connection and welding, which will affect the existence of sediments in the measurement process, whether the machined parts are complete, whether the handwriting is clear, whether the bolts and other parts and accessories required are in short supply.
2. Dimensional inspection means that Location, form and size of all electrical fittings and connecting parts and accessories shall be inspected.
3. The Galvanizing thickness test is to determine whether the galvanizing process of the products provided meets the galvanizing standard. The supplier shall be fully responsible for the correct use of the materials and the quality of the materials.
All these test values and the above performance parameters should be clearly marked in the formal inspection test report.